Products
Key Specifications:
• Continuous Current Rating: 32A
• Rated Voltage: 690V AC (typical for similar contactors)
• Impulse Voltage Resistance: 8kV for enhanced durability
• Operational Voltage Range:
• Three-phase: 220-690V AC
• Single-phase: 220-240V AC
• Motor Power Ratings (AC3):
• Three-phase (400V): Up to 7.5 kW
• Single-phase (230V): Up to 2.2 kW
• Wire Compatibility: Copper wire up to 6mm² (based on size)
• Torque Requirement: Approx. 1.2 - 2 Nm on terminal screws
• Auxiliary Contact Ratings: 10A / 250V AC (for NO auxiliary contact)
• Safety Compliance: Suitable for circuits with up to 5000 RMS symmetrical amperes at 600V max, when protected by NTD fuses
Key Specifications:
- Continuous Current Rating: 40A
- Rated Voltage: Up to 1000V
- Impulse Voltage Resistance: 8kV for enhanced durability
- Operational Voltage Range:
- Three-phase:230V, 400V, 500-690V
- Single-phase: 200-220V, 440V
- Motor Power Ratings (AC3):
- Three-phase: Up to 5.5kW, 11.5kW, 15kW
- Single-phase: Up to 10hp
- Wire Compatibility: AWG 10-18 CU 75°C
- Torque Requirement: 7 lb-in
- Auxiliary Contact Ratings: A600, P600
- Safety Compliance:* Suitable for circuits with up to *5000 RMS symmetrical amperes at 600V max, when protected by NTD fuses
Key Specifications
• Continuous Current Rating: 50A
• Rated Voltage (Ui): 1000V
• Impulse Voltage Resistance (Uimp): 8kV
Operational Voltage & Power Ratings:
Three-Phase (3~):
• 230V: 7.5 kW
• 400V: 15 kW
• 500–690V: 18.5 kW
Single-Phase (1ph):
• 240V: 7.5 hp
Three-Phase (3ph):
• 200–240V: 10 hp
• 480V: 20 hp
• 600V: 30 hp
JEM Ratings:
• Voltage (V): 200–220 / 440
• Power (AC3.1.0.0 kW): 5.5 / 11
Wire Compatibility:
• AWG: 10–18 CU
• Temperature Rating: 75°C
Torque Requirement: 7 lb-in
Auxiliary Contact Ratings: A600 / P600
Safety Compliance: Suitable for use on a circuit capable of delivering not more than 5000 RMS symmetrical amperes, 600 volts maximum when protected by NTD fuses
Key Specifications
• Continuous Current Rating: 50A
• Rated Voltage (Ui): 1000V
• Impulse Voltage Resistance (Uimp): 8kV
Operational Voltage & Power Ratings:
Three-Phase (3~):
• 230V: 7.5 kW
• 400V: 15 kW
• 500–690V: 18.5 kW
Single-Phase (1ph):
• 240V: 7.5 hp
Three-Phase (3ph):
• 200–240V: 10 hp
• 480V: 20 hp
• 600V: 30 hp
JEM Ratings:
• Voltage (V): 200–220 / 440
• Power (AC3.1.0.0 kW): 5.5 / 11
Wire Compatibility:
• AWG: 10–18 CU
• Temperature Rating: 75°C
Torque Requirement: 7 lb-in
Auxiliary Contact Ratings: A600 / P600
Safety Compliance: Suitable for use on a circuit capable of delivering not more than 5000 RMS symmetrical amperes, 600 volts maximum when protected by NTD fuses
-
EVGRN
- (Module Schneider)
- 600V AC Max
- Continuous Current: 175A
- Module: LC1 - F150
- 3 Pole: 1 L1 - 3 L2 - 5 L3
-
IEC:
-
UI: 1000V~
-
TH: 200A
- VDC:
-
UI: 1500V~
TH: 200A
- EVGRN
- (Module Schneider)
- TH: 250A
- 600V AC Max
- Continuous Current: 175A
- Module: LC1 - F150
- 3 Pole: 1 L1 - 3 L2 - 5 L3
- IEC:
- UI: 1000V~
- TH: 250A
- VDC:
- UI: 1500V~
EVGRN
(Module Schneider)
-
TH: 315A
-
600V AC Max
Continuous Current: 285A
Module: LC1 - F225
3 Pole: 1 L1 - 3 L2 - 5 L3
-
IEC:
-
UI: 1000V~
-
TH: 315A
- VDC:
-
UI: 1500V~
- Contactor Inverseur 25/40A
- 2Open-2Close /Good Quality
- Made in China /CCA Switch
- AeLlFV
- Contactor Inverseur 25/40A
- 2Open-2Close /Good Quality
- volt:220-230v
- 50/60hz
- current:40A
- Ui:750v
- Ui:1000c
- dimension:9x5.5x8cm
- Made in China /CCA Switch
EVGRN
Contactor 4Pole/ By Schneider
- 2NO/2NC
- AUC1-100
- 230V-50/60Hz
EVGRN
Contactor 4Pole/ By Schneider
- 2NO/2NC
- AUC1-63
- 230V-50/60H